Lesson #1 What is PLC ? PLC Hardware ? PLC scan Cycle ?

Lesson #2 Make a new Project in the Simatic Manager 

Lesson #3 First One Line Project in the Simatic Manager 

Lesson #4 Normal Open and Normal Close Bit Logic 

Lesson #5 Logic gates implementation in the Ladder logic 

Lesson #6 Simple Hold ON circuit using a Start Stop Push Button 

Lesson #7 Simple Direct Online Motor Starter in Ladder Logic 

Lesson #8 Motor reverse forward Starter using Ladder Logic 

Lesson #9 Make a Motor Control Block Function 

Lesson #10  Shutter door Open and Close Project 

Lesson #11 Rising edge and Falling detection in the Ladder logic

Lesson #12 ON Delay and OFF Delay Timers in the Ladder logic

Lesson #13 Car Wash Station Project 

Lesson #14 SR and RS Latch in the Ladder logic

Lesson #15 UP Counter and Down Counter in the Ladder Logic

Lesson #16 Car Parking Project using the Counters and Ladder Logic

Lesson #17 Flow and Totalizer project in the Ladder Logic

Lesson #18 How to use the Shift Registers 

Lesson #19 Add HMI in the Simatic Manager Project , Communicate to PLC via Profibus

Lesson #20 Tank Level Control Application Mimic on the HMI 

Lesson #21 How to make Face Plates in WINCC 

Lesson #22 Analog Input Reading and Scaling in the Ladder Logic

Lesson #23 Analog Out Signals Scaling in the Ladder Logic

Lesson #24 Tank Level Control Application using Analog IO and MIMIC Process on the HMI

Lesson #25 Configure alarms in the HMI (WINCC)

Lesson #26 USER Administration in the HMI (WINCC)

Lesson #27 Communication between PLC to expansion IO over profibus

Lesson #28 How to read Encoder using S7 300 PLC and Simatic Manager

Lesson #29 Measure length using encoder and display readings on the HMI (S7 300 PLC)

Lesson #30  Measure Speed using encoder and display readings on the HMI (S7 300 PLC)

Lesson #31 VFD Motor Speed Contol using 4 to 20mA signal with PLC s7 300 and HMI

Lesson #32 Stepper Motor Control using S7 300 PLC and HMI

Lesson #33 Control a Servo Drive using S7 300 PLC and HMI

Lesson #34 PID Control using the S7 300 PLC and HMI

Lesson #35 PLC communication with OPC Server

Lesson#36 Final Project